Original file

Mercedes-Benz S Bosch MD1CP001 6569011500 / 10SW091433

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz S, hardware number 6569011500 and software number 10SW091433, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sdiesel 286PS
Control unit
Bosch MD1CP001
File size
2,048.00 KB
Contents
Flash
Hardware number
6569011500
Software number
10SW091433

Technical data

Vehicle
BrandMercedes-Benz
Car modelS
Enginediesel 286PS
Power286.0PS / 210.4kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number6569011500
Software number10SW091433
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4c453ac824e4d8b1
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW091433Offset in the file: 0x000144
Data set number6569039403Offset in the file: 0x0FDD85
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_8051D///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6569011500 and software number 10SW091433. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
656901150010SW088136Mercedes-Benz
656901150010SW088388Mercedes-Benz GLS
656901150010SW088389Mercedes-Benz GLE
656901150010SW088644Mercedes-Benz CLS
65690115006569035703Mercedes-Benz S350d 3.0d
65690115006569036203Mercedes-Benz E 400d (2.9)
65690115006569037003Mercedes-Benz GLS350d 3.0d
65690115006569037203Mercedes-Benz GLE 350 D

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page