Original file

BMW Bosch MD1CP002 O_8KWG0-000046D8-003 / B57D30O0-G3XB57O0_4WW_PM

An original (stock) flash read of the Bosch MD1CP002 control unit, fitted in BMW, hardware number O_8KWG0-000046D8-003 and software number B57D30O0-G3XB57O0_4WW_PM, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW3.0 diesel 265PS
Control unit
Bosch MD1CP002
File size
7,680.00 KB
Contents
Flash
Hardware number
O_8KWG0-000046D8-003
Software number
B57D30O0-G3XB57O0_4WW_PM

Technical data

Vehicle
BrandBMW
Engine3.0 diesel 265PS
Power265.0PS / 194.9kW
Control unit
Control unitBosch MD1CP002
ECU makerBosch
Hardware numberO_8KWG0-000046D8-003
Software numberB57D30O0-G3XB57O0_4WW_PM
File
File typeOriginal flash read
File size7,680.00 KB (7,864,320 bytes)
File keya0d9220a38441315
Identification read from the file
ECU nameMD1CP002
Data set descriptionB57D30O0-G3XB57O0_4WW_PM
Bosch project identifier (EPK)38/1/MDG1_MD1CP002/11/P_1289//VKWG0///Offset in the file: 0x0519D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_8KWG0-000046D8-003 and software number B57D30O0-G3XB57O0_4WW_PM. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP002

Bosch MD1CP002 original files

The Bosch MD1CP002 unit page