Original file

BMW X5 Bosch MD1CP032 O_8OMU0-0000956A-001 / B57D30T2-G05B57T2_RDE2A03

An original (stock) flash read of the Bosch MD1CP032 control unit, fitted in BMW X5, hardware number O_8OMU0-0000956A-001 and software number B57D30T2-G05B57T2_RDE2A03, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X53.0 diesel 340PS
Control unit
Bosch MD1CP032
File size
8,192.00 KB
Contents
Flash
Hardware number
O_8OMU0-0000956A-001
Software number
B57D30T2-G05B57T2_RDE2A03

Technical data

Vehicle
BrandBMW
Car modelX5
Engine3.0 diesel 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch MD1CP032
ECU makerBosch
Hardware numberO_8OMU0-0000956A-001
Software numberB57D30T2-G05B57T2_RDE2A03
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyae6d177554722316
Identification read from the file
ECU nameMD1CP032
Data set descriptionB57D30T2-G05B57T2_RDE2A03
Bosch project identifier (EPK)38/1/MDG1_MD1CP032/11/P_1659//VOMU0///Offset in the file: 0x690228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP032 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_8OMU0-0000956A-001 and software number B57D30T2-G05B57T2_RDE2A03. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP032

Bosch MD1CP032 original files

The Bosch MD1CP032 unit page