Original file

Mini Cooper SD Bosch MD1CS001 O_8SFB2-0000581F-061 / B47C20O1-F60B47O1_AWW_AT

An original (stock) flash read of the Bosch MD1CS001 control unit, fitted in Mini Cooper SD, hardware number O_8SFB2-0000581F-061 and software number B47C20O1-F60B47O1_AWW_AT, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mini Cooper SD2.0 diesel 190PS
Control unit
Bosch MD1CS001
File size
8,192.00 KB
Contents
Flash
Hardware number
O_8SFB2-0000581F-061
Software number
B47C20O1-F60B47O1_AWW_AT

Technical data

Vehicle
BrandMini
Car modelCooper SD
Engine2.0 diesel 190PS
Power190.0PS / 139.7kW
Control unit
Control unitBosch MD1CS001
ECU makerBosch
Hardware numberO_8SFB2-0000581F-061
Software numberB47C20O1-F60B47O1_AWW_AT
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key745f94acfe50cc34
Identification read from the file
ECU nameMD1CS001
Data set descriptionB47C20O1-F60B47O1_AWW_AT
Bosch project identifier (EPK)38/1/MDG1_MD1CS001/11/P_1561//VSFB2///Offset in the file: 0x61D480

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_8SFB2-0000581F-061 and software number B47C20O1-F60B47O1_AWW_AT. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS001

Bosch MD1CS001 original files

The Bosch MD1CS001 unit page