Original file

BMW 2 Serie - Active Tourer Bosch MD1CS001 O_8SFP0-00005804-002 / B37C15U1-F45B37U1_FWW_AT

An original (stock) flash read of the Bosch MD1CS001 control unit, fitted in BMW 2 Serie - Active Tourer, hardware number O_8SFP0-00005804-002 and software number B37C15U1-F45B37U1_FWW_AT, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2 Serie - Active Tourer1.5 diesel 115PS
Control unit
Bosch MD1CS001
File size
2,048.00 KB
Contents
Flash
Hardware number
O_8SFP0-00005804-002
Software number
B37C15U1-F45B37U1_FWW_AT

Technical data

Vehicle
BrandBMW
Car model2 Serie - Active Tourer
Engine1.5 diesel 115PS
Power115.0PS / 84.6kW
Control unit
Control unitBosch MD1CS001
ECU makerBosch
Hardware numberO_8SFP0-00005804-002
Software numberB37C15U1-F45B37U1_FWW_AT
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key872f06d6835b3ab0
Identification read from the file
ECU nameMD1CS001
Data set descriptionB37C15U1-F45B37U1_FWW_AT
Bosch project identifier (EPK)38/1/MDG1_MD1CS001/11/P_1561//VSFP0///Offset in the file: 0x08FE2C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CS001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_8SFP0-00005804-002 and software number B37C15U1-F45B37U1_FWW_AT. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CS001

Bosch MD1CS001 original files

The Bosch MD1CS001 unit page