Original file
Kia Rio Bosch ME17.9.11 GAUB-FE62FF01500
An original (stock) flash read of the Bosch ME17.9.11 control unit, fitted in Kia Rio, software number GAUB-FE62FF01500, 1,024.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Kia Rio1.2 · 86.0PS / 63.3kW
- Control unit
- Bosch ME17.9.11
- Read type
- Calibration only (data set)
- File
- 1,024.00 KB · Flash
- Software number
- GAUB-FE62FF01500
- Bosch part / software
- 10SW020911
Technical data
| Brand | Kia |
|---|---|
| Car model | Rio |
| Engine | 1.2 |
| Fuel | Petrol |
| Power | 86.0PS / 63.3kW |
| Control unit | Bosch ME17.9.11 |
|---|---|
| ECU maker | Bosch |
| Software number | GAUB-FE62FF01500 |
| File type | Original flash read |
|---|---|
| File size | 1,024.00 KB (1,048,576 bytes) |
| File key | 40d9945d226712ee |
| ECU name | ME17.9.11 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW020911 | Offset in the file: 0x02001A |
| Software / calibration | GAUB-FE62FF01500 | Offset in the file: 0x03FE10 |
| Internal build string | 17911001147 _CAN_VM_100_11_G.1.10 | Offset in the file: 0x012C50 |
| Bosch project identifier (EPK) | 53/1/VM17/147/ME17.9.11//ECK451U01/GAUB_FE62FF01500// | Offset in the file: 0x03FE10 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch ME17.9.11 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number GAUB-FE62FF01500. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch ME17.9.11
| Hardware | Software | Vehicles |
|---|---|---|
| GATA-BE50FS06500 | Kia Picanto | |
| GATA-BE52FS07500 | Kia | |
| GAUB-DE52FS00500 | Hyundai i10, Hyundai Rio, Kia | |
| GAUB-EE52FS01500 | Kia Rio | |
| GAYD-CE46FS01600 | Kia GAYD | |
| GAYD-CE46QS01C00 | Kia GAYD CE46QS01C00 | |
| GAYDCDP46FS03600 | Kia cee`d, Kia K3 | |
| GAYDCDP56QS01C00 | Kia K3 |