Original file

Hyundai I30 Bosch ME17.9.11 GAGD-BE54FS00600 / GAGD-BE54FS00600

An original (stock) flash read of the Bosch ME17.9.11 control unit, fitted in Hyundai I30, hardware number GAGD-BE54FS00600 and software number GAGD-BE54FS00600, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai I301.4 petrol 99PS
Control unit
Bosch ME17.9.11
Read type
Full read (boot area included)
File
1,504.00 KB · Flash
Hardware number
GAGD-BE54FS00600
Software number
GAGD-BE54FS00600

Technical data

Vehicle
BrandHyundai
Car modelI30
Engine1.4 petrol 99PS
Power99.0PS / 72.8kW
Control unit
Control unitBosch ME17.9.11
ECU makerBosch
Hardware numberGAGD-BE54FS00600
Software numberGAGD-BE54FS00600
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key84054a7dc84345a8
Identification read from the file
ECU nameME17.9.11
Read typeFull read (boot area included)
ProcessorTC1764
Software / calibrationGAGD-BE54FS00600Offset in the file: 0x03FE10
Internal build string17911001147 _CAN_VM_100_11_G.1.10Offset in the file: 0x012C50
Bosch project identifier (EPK)53/1/VM17/147/ME17.9.11//ECG410P01/GAGD_BE54FS00600//Offset in the file: 0x03FE10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.9.11 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number GAGD-BE54FS00600 and software number GAGD-BE54FS00600. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.9.11

HardwareSoftwareVehicles
9001140197GAMD-BE36QS00C00Hyundai GAMD BE36QS00C00
9003100005GYN-A56CQS2-A000Kia GYN A56CQS2 A000 stok, Kia Venga
9003100027GEDVA36CQS2-A000Kia GEDVA36CQS2 А000, Kia AT, Kia Ceed
9003100028GEDVA46CQS4-A000Kia GEDVA46CQS4 A000
9003100030GEDVA56CQS3-A000Kia Ceed
9003100067GFDVA46CQS2-A000Hyundai GFDVA46CQS2 А000, Hyundai GFDVA46CQS2 A000 stok, Kia
9003100069GFDVA56CQS1-A000Hyundai i30
GATA-EE50FS00500GATA-EE50FS00500Kia Picanto

Bosch ME17.9.11 original files

The Bosch ME17.9.11 unit page