Original file

Ford Kuga Bosch ME9.0 0261209471 / 1037500815

An original (stock) flash read of the Bosch ME9.0 control unit, fitted in Ford Kuga, hardware number 0261209471 and software number 1037500815, 2,049.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Kuga2.5 petrol 200PS
Control unit
Bosch ME9.0
Read type
Full read (boot area included)
File
2,049.00 KB · Flash
Hardware number
0261209471
Software number
1037500815
Vehicle maker's hardware number
9V4N-12A650-AE

Technical data

Vehicle
BrandFord
Car modelKuga
Engine2.5 petrol 200PS
Power200.0PS / 147.1kW
Control unit
Control unitBosch ME9.0
ECU makerBosch
Hardware number0261209471
Software number1037500815
File
File typeOriginal flash read
File size2,049.00 KB (2,098,176 bytes)
File key5605874acd2a770a
Identification read from the file
ECU nameME9.0
Read typeFull read (boot area included)
Bosch part / software1037500815Offset in the file: 0x200026
Vehicle maker's hardware number9V4N-12A650-AEOffset in the file: 0x1CF8D0
Bosch project identifier (EPK)54/1/ME90C/19/4X25T08//PS40F500/PS40F500/130109184507/Offset in the file: 0x1C3480

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME9.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261209471 and software number 1037500815. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME9.0

HardwareSoftwareVehicles
02612093541039S32279Ford Kuga, Ford Kuga/Escape
02612093971037399913Ford Focus, Ford Kuga
02612094681037400820Ford Focus RS 2.5T
02612094681039S33342Ford Focus, Ford Focus RS
02612094731037500816Ford Kuga
02612094731039S34025Ford Kuga
02612094741039S34026Ford Kuga
0261209476Ford Focus

Bosch ME9.0 original files

The Bosch ME9.0 unit page