Original file

BMW 1er Bosch MEVD17.2.x 008798098G1BQFP6S / 10SW004309

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 1er, hardware number 008798098G1BQFP6S and software number 10SW004309, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1er
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
008798098G1BQFP6S
Software number
10SW004309
DME hardware number
8664451

Technical data

Vehicle
BrandBMW
Car model1er
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number008798098G1BQFP6S
Software number10SW004309
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyb65e51f092ddbb50
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
Bosch part / software10SW004309Offset in the file: 0x02001A
DME hardware number8664451Offset in the file: 0x00D8AA
Software / calibration008798098G1BQFP6SOffset in the file: 0x180079
Internal build string011_G.8.7.0_MEVD172_P_NROffset in the file: 0x00D558
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//79898G1B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 008798098G1BQFP6S and software number 10SW004309. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page