Original file

Audi Bosch MED17.1.27 04E907309DS / 10SW048616

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Audi, hardware number 04E907309DS and software number 10SW048616, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
AudiDJSA
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309DS
Software number
10SW048616
Software / calibration
04E906025T

Technical data

Vehicle
BrandAudi
EngineDJSA
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04E907309DS
Software number10SW048616
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3c12948652261ac7
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW048616Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309DSOffset in the file: 0x3D670E
Software / calibration04E906025T · version 7403Offset in the file: 0x3D6728
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V13C001_M19B48///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309DS and software number 10SW048616. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04E907309DJ10SW086592Volkswagen
04E907309DJ10SW086595Volkswagen
04E907309DM10SW070430Škoda
04E907309DS048726Audi A3 1.4 TSI/TFSI, Audi A3 1.4 TFSI
04E907309DS10SW048726Audi
04E907309DS10SW048744Audi
04E907309EE10SW070083Volkswagen
04E907309EE10SW070085Volkswagen

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page