Original file

Audi Bosch MED17.1.27 04E907309EP / 10SW068435

An original (stock) flash read of the Bosch MED17.1.27 control unit, fitted in Audi, hardware number 04E907309EP and software number 10SW068435, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
AudiDJSA
Control unit
Bosch MED17.1.27
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04E907309EP
Software number
10SW068435
Software / calibration
04E906025CB

Technical data

Vehicle
BrandAudi
EngineDJSA
Control unit
Control unitBosch MED17.1.27
ECU makerBosch
Hardware number04E907309EP
Software number10SW068435
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keycfe9d13f60027fe4
Identification read from the file
ECU nameMED17.1.27
Read typeFull read (boot area included)
Bosch part / software10SW068435Offset in the file: 0x02001A
Vehicle maker's hardware number04E907309EPOffset in the file: 0x3DF32A
Software / calibration04E906025CB · version 1127Offset in the file: 0x3DF344
Internal build stringMED17 CB.09.07.01Offset in the file: 0x20FD80
Bosch project identifier (EPK)38/1/MED17/3///D17127V13C001_M20D71///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.1.27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309EP and software number 10SW068435. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.1.27

HardwareSoftwareVehicles
04E907309EN10SW084041Volkswagen
04E907309EP04E907309EPAudi A3
04E907309EP062624Audi A3 1.4 TFSI
04E907309EP062778Audi Q2 1.0 TFSI
04E907309EP068435Audi Q3 1.0 TSI
04E907309EQ10SW083466Škoda
04E907309FG10SW097343Volkswagen
4N38330L57H00001037544282Mercedes-Benz C

Bosch MED17.1.27 original files

The Bosch MED17.1.27 unit page