Original file

Bentley Mulsanne Bosch ME17.1.1 07V907018A / 1037540126

An original (stock) flash read of the Bosch ME17.1.1 control unit, fitted in Bentley Mulsanne, hardware number 07V907018A and software number 1037540126, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Bentley Mulsanne540PS
Control unit
Bosch ME17.1.1
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
07V907018A
Software number
1037540126
Bosch part / software
10SW046189
Software / calibration
07V906018T

Technical data

Vehicle
BrandBentley
Car modelMulsanne
Engine540PS
FuelPetrol
Displacement6.8
Control unit
Control unitBosch ME17.1.1
ECU makerBosch
Hardware number07V907018A
Software number1037540126
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydf15fc4e2224c0c6
Identification read from the file
ECU nameME17.1.1
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW046189Offset in the file: 0x02001A
Vehicle maker's hardware number07V907018AOffset in the file: 0x3C1ED6
Software / calibration07V906018T · version 7183Offset in the file: 0x3C1EF0
Internal build stringMED17 CB.06.02.01Offset in the file: 0x00E776
Bosch project identifier (EPK)48/1/ME17/5/S1711B01C000//S1711B01C000_NY19C3///Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.1.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07V907018A and software number 1037540126. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.1.1

HardwareSoftwareVehicles
07V9070181037504563Bentley
07V9070181037507810Bentley Mulsanne 6.75L
07V9070181037509111Bentley Mulsanne 6.75L
07V9070181037512943Bentley Mulsanne 6.75L
07V907018A1037551173Bentley Mulsanne 6.75 V8
07V907018A1037551327Bentley Mulsanne 6.75 V8, Bentley Mulsanne
07V907018A1037551870Bentley Mulsanne 6.75 V8
07V907018A10SW009555Bentley Mulsanne 6.75 V8

Bosch ME17.1.1 original files

The Bosch ME17.1.1 unit page