Original file

Mercedes-Benz A35 AMG Bosch MED17.7 2649024100 / 10SW039623

An original (stock) flash read of the Bosch MED17.7 control unit, fitted in Mercedes-Benz A35 AMG, hardware number 2649024100 and software number 10SW039623, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A35 AMG2.0 · 306.0PS / 225.1kW
Control unit
Bosch MED17.7
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
2649024100
Software number
10SW039623
Bosch part / software
10SW049294

Technical data

Vehicle
BrandMercedes-Benz
Car modelA35 AMG
Engine2.0
FuelPetrol
Power306.0PS / 225.1kW
Control unit
Control unitBosch MED17.7
ECU makerBosch
Hardware number2649024100
Software number10SW039623
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5c3811cb0cd794e4
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW049294Offset in the file: 0x02001A
Software / calibration2649024100Offset in the file: 0x020213
Data set number2649031301Offset in the file: 0x29B235
Boot software2649040400Offset in the file: 0x00FC4D
Internal build string001_5.11.00_CFG13;0Offset in the file: 0x00FC24
Bosch project identifier (EPK)34/1/MED17/3///D177_4A6_18B045S///Offset in the file: 0x2BDF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 2649024100 and software number 10SW039623. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7

HardwareSoftwareVehicles
08115403381037508406Mercedes-Benz SL63
15790200001037508406Mercedes-Benz CLS 63 AMG, Mercedes-Benz CLS63
177904500010SW022008Aston Martin DB11
26490235002649039400Mercedes-Benz E
27090289001037526717Mercedes-Benz GLA
27690261001037521144Mercedes-Benz ML 300
27690340032769034003Mercedes-Benz SLC 43 AMG
27890231001037521144Mercedes-Benz E 63 AMG, Mercedes-Benz CLS500

Bosch MED17.7 original files