Original file

Mercedes-Benz C Bosch MED17.7.2 4S45520T5NS0000 / 1037526717

An original (stock) flash read of the Bosch MED17.7.2 control unit, fitted in Mercedes-Benz C, hardware number 4S45520T5NS0000 and software number 1037526717, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C2.0 diesel 211PS
Control unit
Bosch MED17.7.2
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4S45520T5NS0000
Software number
1037526717
Bosch part / software
10SW016595
Software / calibration
2749029300

Technical data

Vehicle
BrandMercedes-Benz
Car modelC
Engine2.0 diesel 211PS
Power211.0PS / 155.2kW
Control unit
Control unitBosch MED17.7.2
ECU makerBosch
Hardware number4S45520T5NS0000
Software number1037526717
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key546d2acbb43e7694
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW016595Offset in the file: 0x02001A
Software / calibration2749029300Offset in the file: 0x02020F
Data set number2749030203Offset in the file: 0x3F2EAE
Boot software2709040700Offset in the file: 0x00FC51
Internal build stringME177_9700D010_6.70_SERIES;0 M270Offset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4S45520T5NS0000 and software number 1037526717. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.2

HardwareSoftwareVehicles
4N38250E57H00001037520801Mercedes-Benz A180
4N38250E57H00001037529983Mercedes-Benz A180
4N40110F57H00001037520801Mercedes-Benz A180
4N41DG0F57H0000028917Mercedes-Benz C180
4S45520T5NS000010SW016595Mercedes-Benz C
4S455B0T5NS000210SW083351Mercedes-Benz C200
5567831037526717Mercedes-Benz A
A27090009001037520801Mercedes-Benz A45, Mercedes-Benz A

Bosch MED17.7.2 original files

The Bosch MED17.7.2 unit page