Original file
Ford Bosch MED17.0.1 DG9A-12B684-XB / 10SW012061
An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford, hardware number DG9A-12B684-XB and software number 10SW012061, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford
- Control unit
- Bosch MED17.0.1
- Read type
- Full read (boot area included)
- File
- 2,048.00 KB · Flash
- Hardware number
- DG9A-12B684-XB
- Software number
- 10SW012061
- Vehicle maker's hardware number
- FS7A-12A650-BSH
Technical data
| Brand | Ford |
|---|
| Control unit | Bosch MED17.0.1 |
|---|---|
| ECU maker | Bosch |
| Hardware number | DG9A-12B684-XB |
| Software number | 10SW012061 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | 75cc8864f8ce0806 |
| ECU name | MED17.0.1 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1767 | |
| Bosch part / software | 10SW012061 | Offset in the file: 0x00401A |
| Vehicle maker's hardware number | FS7A-12A650-BSH | Offset in the file: 0x00FC30 |
| Software / calibration | DG9A-12B684-XB | Offset in the file: 0x00FC00 |
| Engine description | KS7A-14C204-VA | Offset in the file: 0x1FFF4B |
| Internal build string | MED170_PBL_67_T3_DG506_1 | Offset in the file: 0x00FA58 |
| Bosch project identifier (EPK) | 44/1/MED17/22/MEDECM//D1701_021_0500/Dst00// | Offset in the file: 0x07FF08 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DG9A-12B684-XB and software number 10SW012061. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MED17.0.1
| Hardware | Software | Vehicles |
|---|---|---|
| DG9A-12B684-XB | Ford Mondeo | |
| DG9A-12B684-XB | 1037549316 | Ford Mondeo |
| DG9A-12B684-XB | 10SW004458 | Ford Mondeo |
| DG9A-12B684-XB | 10SW006292 | Ford Mondeo |
| DG9A-12B684-XB | 10SW017026 | Ford |
| DN15-14C204-AD | 1037539296 | Ford EcoSport |
| DV21-14C204-AE | 1037528704 | Ford C-Max, Ford B max |
| DV21-14C204-AF | 1037528704 | Ford B-Max |