Original file

Ford Bosch MED17.2.2 F1EA-12B684-CA / 10SW017801

An original (stock) flash read of the Bosch MED17.2.2 control unit, fitted in Ford, hardware number F1EA-12B684-CA and software number 10SW017801, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford
Control unit
Bosch MED17.2.2
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
F1EA-12B684-CA
Software number
10SW017801
Vehicle maker's hardware number
H1FA-12A650-UC

Technical data

Vehicle
BrandFord
Control unit
Control unitBosch MED17.2.2
ECU makerBosch
Hardware numberF1EA-12B684-CA
Software number10SW017801
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc00521d53e2ca468
Identification read from the file
ECU nameMED17.2.2
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW017801Offset in the file: 0x00401A
Vehicle maker's hardware numberH1FA-12A650-UCOffset in the file: 0x00FC30
Software / calibrationF1EA-12B684-CAOffset in the file: 0x00FC00
Engine descriptionH1FA-14C204-UDOffset in the file: 0x3FFC4F
Internal build stringMED170_PBL_97_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/22/CYCLONE_MEDG170//DG170_601_0830/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.2.2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1EA-12B684-CA and software number 10SW017801. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.2.2

HardwareSoftwareVehicles
F1EA-12B684-CA10SW008222Ford Focus RS
F1EA-12B684-CA10SW008861Ford Focus, Ford Focus ST
F1EA-12B684-CA10SW011635Ford Focus ST
F1EA-12B684-CA10SW014642Ford Focus RS KORBEL !!, Ford Focus
F1EA-12B684-CA10SW022636Ford Focus
F1GA-12B684-EAFord S-Max
F1GA-12B684-EA10SW017892Ford Galaxy
FB5A-12B684-CALincoln

Bosch MED17.2.2 original files

The Bosch MED17.2.2 unit page