Original file

Ford Focus Bosch MED17.0.1 H1FA-14C204-BB

An original (stock) flash read of the Bosch MED17.0.1 control unit, fitted in Ford Focus, software number H1FA-14C204-BB, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus1.0 · 125.0PS / 91.9kW
Control unit
Bosch MED17.0.1
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Software number
H1FA-14C204-BB

Technical data

Vehicle
BrandFord
Car modelFocus
Engine1.0
FuelPetrol
Power125.0PS / 91.9kW
Control unit
Control unitBosch MED17.0.1
ECU makerBosch
Software numberH1FA-14C204-BB
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key401894c4cd34cc89
Identification read from the file
ECU nameMED17.0.1
Read typeFull read (boot area included)
ProcessorTC1767
Software / calibrationH1FA-14C204-BBOffset in the file: 0x1FFF4B
Internal build stringMED170_PBL_67_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)44/1/MED17/22/MEDECM//D1701_025_0442/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number H1FA-14C204-BB. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0.1

HardwareSoftwareVehicles
H1DA-14C204-ADFord C-Max, Ford Focus
H1DA-14C204-DDFord C-Max
H1FA-14C204-AEDFord Focus
H1FA-14C204-AEEFord Focus
H1FA-14C204-BDFord Focus
H1FA-14C204-DCFord Focus
HV6A-14C204-EBFord Tourneo
HV6A-14C204-ECFord

Bosch MED17.0.1 original files

The Bosch MED17.0.1 unit page