Original file

Volvo XC60 Bosch MED17.0 AG9N-14C204-BAG / 1037506930

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Volvo XC60, hardware number AG9N-14C204-BAG and software number 1037506930, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo XC602.0 petrol 203PS
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
AG9N-14C204-BAG
Software number
1037506930
Bosch part / software
1037523091
Software / calibration
31361703 AA

Technical data

Vehicle
BrandVolvo
Car modelXC60
Engine2.0 petrol 203PS
Power203PS / 149.3kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberAG9N-14C204-BAG
Software number1037506930
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9282aeb54ecbaf1b
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037523091Offset in the file: 0x08001A
Software / calibration31361703 AAOffset in the file: 0x060C35
Boot software31312683 AAOffset in the file: 0x00FC18
Internal build stringMED170_PBL_67_T0_DG502_0Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/2/I420GMO//D170_119_97_0931/210410/181534/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number AG9N-14C204-BAG and software number 1037506930. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
7099271681278402588Ford Focus 2.0ST 2012 184KWKW, Ford Focus ST, Ford Focus
AG91-14C204-NC1037507888Ford Mondeo, Ford S-Max, Ford Galaxy
AG91-14C204-ND1037512112Ford S-Max
AG9N-14C204-AAH1037506930Volvo V60, Volvo V70
BB5A-12B684-ACFord Focus, Ford Focus ST
BB5A-12B684-AC1037525361Ford Focus ST
BB5A-12B684-AC1037525731Ford
BB5A-12B684-AC1037526567Ford Focus, Ford Focus KW, Ford Focus ST

Bosch MED17.0 original files

The Bosch MED17.0 unit page