Original file

Ford C-Max Bosch MED17.0 BV61-12A650-DZA / 1037537964

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford C-Max, hardware number BV61-12A650-DZA and software number 1037537964, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford C-Max1.6 petrol 150PS
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
BV61-12A650-DZA
Software number
1037537964
Software / calibration
BV61-12B684-AD

Technical data

Vehicle
BrandFord
Car modelC-Max
Engine1.6 petrol 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBV61-12A650-DZA
Software number1037537964
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key92059b58c9e77bd7
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037537964Offset in the file: 0x08001A
Vehicle maker's hardware numberBV61-12A650-DZAOffset in the file: 0x00FC30
Software / calibrationBV61-12B684-ADOffset in the file: 0x00FC00
Engine descriptionBV61-14C204-DZAOffset in the file: 0x06479B
Internal build stringMED170_PBL_67_T3_DG502_0Offset in the file: 0x00FA58
Bosch project identifier (EPK)56/1/MED17/2/SIG16GGA//D170_06D_106A_0D05/301111/123652/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BV61-12A650-DZA and software number 1037537964. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BJ32-14C204-MEV1037517034Land Rover Evoque
BV61-12A650-CUA1037523832Ford C-Max 1.6 STCI, Ford C Max T 2012, Ford C-Max
BV61-12A650-CXA1037523899Ford Focus
BV61-12A650-CYA1037523895Ford Focus
BV61-12B684-BA1037523133Ford Focus
BV61-12B684-BCFord Focus 2.0L 2015y
BV61-12B684-DAFord Focus
BV61-12B684-DA1037524091Ford Focus EcoBoost Benzin 125KWKW

Bosch MED17.0 original files

The Bosch MED17.0 unit page