Original file

Fiat Abarth Bosch ME17.3.0 0261S10632

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Abarth, hardware number 0261S10632, 1,520.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Abarth1.4 petrol 140PS
Control unit
Bosch ME17.3.0
Read type
Full read (boot area included)
File
1,520.00 KB · Flash
Hardware number
0261S10632
Vehicle maker's hardware number
55260603
Software / calibration
173072105A2

Technical data

Vehicle
BrandFiat
Car modelAbarth
Engine1.4 petrol 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S10632
File
File typeOriginal flash read
File size1,520.00 KB (1,556,480 bytes)
File key2943194722602ff1
Identification read from the file
ECU nameME17.3.0
Read typeFull read (boot area included)
ProcessorTC1724
Vehicle maker's hardware number55260603Offset in the file: 0x05E655
Software / calibration173072105A2Offset in the file: 0x07BF08
Internal build string11B.08.03.00RBOffset in the file: 0x00A354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105A2///Offset in the file: 0x07BF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S10632. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat 500 AbarthFlash12,288.00 KB€15Add to cart
Fiat 500 AbarthFlash12,288.00 KB€15Add to cart

All reads of 0261S10632

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S104241037540205Fiat 500, Fiat 500 Abarth, Fiat 500 / 595 / 695
0261S104241037542727Fiat Abarth
0261S104241037544055Fiat 500 Abarth, Fiat 500 / 595 / 695, Fiat 500
0261S104241037554106Fiat 500, Fiat 500 / 595 / 695, Fiat Abarth
0261S106321037540965Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S106321037554103Fiat 595 Abarth, Fiat 500, Fiat 595C Turismo
0261S1063210SW005384Fiat 500 Abarth
0261S118561037553965Fiat 500 / 595 / 695

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page