Original file

Geely Binyue Bosch MED17.8.10 EL1907AH5E / EL1907AH5E

An original (stock) flash read of the Bosch MED17.8.10 control unit, fitted in Geely Binyue, hardware number EL1907AH5E and software number EL1907AH5E, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Geely Binyue1.5 175PS
Control unit
Bosch MED17.8.10
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
EL1907AH5E
Software number
EL1907AH5E
Bosch part / software
F01R0ADL9B
Software / calibration
EL1907AH00

Technical data

Vehicle
BrandGeely
Car modelBinyue
Engine1.5 175PS
Power175PS / 128.7kW
Control unit
Control unitBosch MED17.8.10
ECU makerBosch
Hardware numberEL1907AH5E
Software numberEL1907AH5E
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyce555aff54406928
Identification read from the file
ECU nameMED17.8.10
Read typeFull read (boot area included)
ProcessorTC1782
Bosch part / softwareF01R0ADL9BOffset in the file: 0x04001A
Software / calibrationEL1907AH00Offset in the file: 0x1FFF08
Bosch project identifier (EPK)38/1/MED17/385/MED17810//EL1907AH00///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.8.10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number EL1907AH5E and software number EL1907AH5E. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.8.10

HardwareSoftwareVehicles
Great Wall HavalGreat Wall Haval
MG6MG6
Maserati MG 6Maserati MG 6
998877766555444333222211100009DSV-001000-B101F01RB0DL5AF01RB0DL5ACF Moto 625
F01R00DLG8Geely Borui
F01R0ADG2BMG 6
F01R0ADH0WGreat Wall H9
F01RB0DL4YF01R00DL4YGS1503A2C3GS1503A2C3CF Moto Z-Force 1000

Bosch MED17.8.10 original files

The Bosch MED17.8.10 unit page