Original file

Škoda Fabia 3 1.0 MPI Bosch ME17.5.26 04E907309CB / 005029

An original (stock) flash read of the Bosch ME17.5.26 control unit, fitted in Škoda Fabia 3 1.0 MPI, hardware number 04E907309CB and software number 005029, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Fabia 3 1.0 MPI1.0 petrol
Control unit
Bosch ME17.5.26
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
04E907309CB
Software number
005029
Bosch part / software
10SW005029
Software / calibration
04C906057AA

Technical data

Vehicle
BrandŠkoda
Car modelFabia 3 1.0 MPI
Engine1.0 petrol
Control unit
Control unitBosch ME17.5.26
ECU makerBosch
Hardware number04E907309CB
Software number005029
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key42c83cac3bc07d56
Identification read from the file
ECU nameME17.5.26
Read typeFull read (boot area included)
ProcessorTC1724
Bosch part / software10SW005029Offset in the file: 0x04001A
Vehicle maker's hardware number04E907309CBOffset in the file: 0x038474
Software / calibration04C906057AA · version 2706Offset in the file: 0x03848E
Internal build stringMED17 CB.04.04.00Offset in the file: 0x00F054
Bosch project identifier (EPK)38/1/MED17/3///S17526V11C000_M24F10///Offset in the file: 0x03FE08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.26 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04E907309CB and software number 005029. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.26

HardwareSoftwareVehicles
04E907309AL10SW011712Volkswagen
04E907309CB003260Seat Ibiza
04E907309CB003261Volkswagen Polo 1.0 MPI
04E907309CB004984Škoda Fabia 2
04E907309CB04C906057AAŠkoda Fabia 2
04E907309CB04E907309CBSeat Mii
04E907309CB1037556749Volkswagen Polo
04E907309CB10SW003261Volkswagen Polo

Bosch ME17.5.26 original files

The Bosch ME17.5.26 unit page