Original file

Volkswagen pcmflash Bosch ME17.5.6 07K906055AL / 1037531988

An original (stock) flash read of the Bosch ME17.5.6 control unit, fitted in Volkswagen pcmflash, hardware number 07K906055AL and software number 1037531988, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflashpetrol
Control unit
Bosch ME17.5.6
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
07K906055AL
Software number
1037531988
Bosch part / software
0261S06176
Vehicle maker's hardware number
07K907309A

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Enginepetrol
Control unit
Control unitBosch ME17.5.6
ECU makerBosch
Hardware number07K906055AL
Software number1037531988
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key1de320316ad8a324
Identification read from the file
ECU nameME17.5.6
Read typeFull read (boot area included)
Bosch part / software0261S06176 / 1037531988Offset in the file: 0x06128A / 0x08001A
Vehicle maker's hardware number07K907309AOffset in the file: 0x0612A0
Software / calibration07K906055AL · version 4743Offset in the file: 0x0612AC
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00EFAE
Bosch project identifier (EPK)46/1/MED17/3/S17563xR//S175635R_M14X00/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.5.6 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 07K906055AL and software number 1037531988. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.5.6

HardwareSoftwareVehicles
07K906055A1037518251Volkswagen pcmflash
07K906055A1037523839Volkswagen pcmflash
07K906055AK1037531989Volkswagen pcmflash
07K906055AL1037524463Volkswagen pcmflash
07K906055AL1037535186Volkswagen pcmflash
07K906055B1037524076Volkswagen pcmflash
07K906055BB1037518256Volkswagen pcmflash
07K906055BB1037524311Volkswagen pcmflash

Bosch ME17.5.6 original files

The Bosch ME17.5.6 unit page