Original file

Mercedes-Benz CLS500 Bosch MED17.7.1 0261S07802 / 1037521144

An original (stock) flash read of the Bosch MED17.7.1 control unit, fitted in Mercedes-Benz CLS500, hardware number 0261S07802 and software number 1037521144, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz CLS5004.7 petrol 407PS
Control unit
Bosch MED17.7.1
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S07802
Software number
1037521144
Bosch part / software
1037524836
Software / calibration
2789021600

Technical data

Vehicle
BrandMercedes-Benz
Car modelCLS500
Engine4.7 petrol 407PS
Power407.0PS / 299.3kW
Control unit
Control unitBosch MED17.7.1
ECU makerBosch
Hardware number0261S07802
Software number1037521144
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2e16311571cc1519
Identification read from the file
ECU nameMED17.7
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037524836Offset in the file: 0x02001A
Software / calibration2789021600Offset in the file: 0x02020F
Data set number2789033600Offset in the file: 0x3EEFBE
Boot software0009040300Offset in the file: 0x00FC51
Internal build stringME177_9700D010_5.60;0 MOffset in the file: 0x00FC28

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.7.1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S07802 and software number 1037521144. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.7.1

HardwareSoftwareVehicles
0261S064971037539112Mercedes-Benz S350
0261S064981037508406Mercedes-Benz CLS63, Mercedes-Benz CLS, Mercedes-Benz CL
0261S064981037518415Mercedes-Benz CL500
0261S064981037520757Mercedes-Benz S500
27890208001037508406Mercedes-Benz S500
6D39060C93B1037519065Mercedes-Benz CLS300
6D42100D93B00011037533128Mercedes-Benz E350
8D38300T83B00011037521144Mercedes-Benz CLS63 AMG

Bosch MED17.7.1 original files

The Bosch MED17.7.1 unit page