Original file

Fiat Doblo Bosch ME17.3.0 0261S09348 / 549987

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Doblo, hardware number 0261S09348 and software number 549987, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Doblo
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0261S09348
Software number
549987
Bosch part / software
1037549987
Vehicle maker's hardware number
55266014
Software / calibration
173076106A0

Technical data

Vehicle
BrandFiat
Car modelDoblo
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S09348
Software number549987
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFiat SW version HW Doblo
File key03697f36b2dbfaec
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S09348 / 1037549987Offset in the file: 0x065646 / 0x08001A
Vehicle maker's hardware number55266014Offset in the file: 0x065661
Software / calibration173076106A0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173076106A0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09348 and software number 549987. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
FiatFlash · From the file name: Fiat SW version HW1,536.00 KB€15Add to cart

All reads of 0261S09348 / 549987

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S0931310SW012218Fiat 500
0261S09313545590Fiat 500L
0261S093141037548642Fiat 500X, Fiat Combo, Opel
0261S09314548642Fiat Doblo
0261S093501037541819Alfa Romeo Giulietta
0261S093501037543752Alfa Romeo Giulietta
0261S093501037552428Alfa Romeo Giulietta
0261S0935010SW011036Alfa Romeo Giulietta

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page