Original file

Fiat Ottimo Bosch ME17.3.0 0261S12352 / 1037550731

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat Ottimo, hardware number 0261S12352 and software number 1037550731, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Ottimo1.4 petrol 150PS
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S12352
Software number
1037550731
Bosch part / software
10SW018403
Vehicle maker's hardware number
55279476
Software / calibration
173070709E0

Technical data

Vehicle
BrandFiat
Car modelOttimo
Engine1.4 petrol 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S12352
Software number1037550731
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File keyb5ba790ff6f3abaf
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software0261S12352 / 10SW018403Offset in the file: 0x05DADE / 0x08001A
Vehicle maker's hardware number55279476Offset in the file: 0x05DAF9
Software / calibration173070709E0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173070709E0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S12352 and software number 1037550731. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Fiat OttimoFlash1,536.00 KB€15Add to cart
Fiat OttimoFlash1,536.00 KB€15Add to cart
Fiat OttimoFlash1,536.00 KB€15Add to cart

All reads of 0261S12352 / 1037550731

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S118591037555924Fiat 500, Fiat 500 Abarth, Fiat Abarth
0261S1185910SW004733Fiat 595
0261S1185910SW004734Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S123511037550730Fiat Viaggio, Fiat Viago
0261S12801038415Fiat Tipo
0261S1280110SW008953Fiat Tipo, Fiat Tipo/Egea
0261S1280110SW012318Fiat Tipo, Fiat Tipo 2018y 1.4L
0261S1280110SW023433Fiat Tipo

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page