Original file

Fiat 595 Abarth Bosch ME17.3.0 0261S17573 / 1755275940

An original (stock) flash read of the Bosch ME17.3.0 control unit, fitted in Fiat 595 Abarth, hardware number 0261S17573 and software number 1755275940, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat 595 Abarth1.4
Control unit
Bosch ME17.3.0
Read type
OBD read (no boot area)
File
1,536.00 KB · Flash
Hardware number
0261S17573
Software number
1755275940
Bosch part / software
10SW010678
Vehicle maker's hardware number
55275940
Software / calibration
173072105B0

Technical data

Vehicle
BrandFiat
Car model595 Abarth
Engine1.4
Control unit
Control unitBosch ME17.3.0
ECU makerBosch
Hardware number0261S17573
Software number1755275940
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key848f6843ec87a8fe
Identification read from the file
ECU nameME17.3.0
Read typeOBD read (no boot area)
ProcessorTC1724
Bosch part / software10SW010678Offset in the file: 0x08001A
Vehicle maker's hardware number55275940Offset in the file: 0x0626C9
Software / calibration173072105B0Offset in the file: 0x07FF08
Internal build string11B.08.03.00RBOffset in the file: 0x00E354
Bosch project identifier (EPK)35/1/MED17/9/ME1730//173072105B0///Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch ME17.3.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S17573 and software number 1755275940. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch ME17.3.0

HardwareSoftwareVehicles
0261S17572010681Fiat 500
0261S1757210SW010681Fiat 500, Fiat 500 Abarth, Fiat Abarth
0261S1757210SW012387Fiat 500, Fiat 595 Abarth Pista BR PERFORMANCE
0261S1757310SW010678Fiat 500, Fiat 500 / 595 / 695, Fiat 595 Abarth
0261S1757410SW010679Fiat 500, Fiat 595 Competizione, Fiat 500 / 595 / 695
0261S21004039955Fiat
0261S2100510SW042645Alfa Romeo Giulietta
0261S2100510SW044632Alfa Romeo Giulietta

Bosch ME17.3.0 original files

The Bosch ME17.3.0 unit page