Original file
Bosch EDC17CP55 GPLA-14C204-NAD / 10SW010846
An original (stock) flash read of the Bosch EDC17CP55 control unit, hardware number GPLA-14C204-NAD and software number 10SW010846, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Control unit
- Bosch EDC17CP55
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- GPLA-14C204-NAD
- Software number
- 10SW010846
- Software / calibration
- P1163_Y242
Technical data
| Control unit | Bosch EDC17CP55 |
|---|---|
| ECU maker | Bosch |
| Hardware number | GPLA-14C204-NAD |
| Software number | 10SW010846 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| From the file name | 5647 |
| File key | a4dbe0ec0188a47a |
| ECU name | EDC17CP55 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW010846 | Offset in the file: 0x02001A |
| Software / calibration | P1163_Y242 | Offset in the file: 0x03F434 |
| Bosch project identifier (EPK) | 39/1/EDC17CP55/190/P1163//P1163_Y242/// | Offset in the file: 0x03F434 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP55 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number GPLA-14C204-NAD and software number 10SW010846. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP55
| Hardware | Software | Vehicles |
|---|---|---|
| GPLA-14C204-NAC | 10SW000184 | Land Rover Range Rover |
| GPLA-14C204-NAC | GPLA-14C204-NAC | Land Rover Range Rover |
| GPLA-14C204-NAC | L405_16_3-20_360_EU6_250_C_8A4 | Land Rover Range Rover 4.4 SDV8 |
| GPLA-14C204-NAD | 10SW000184 | Land Rover Range Rover, Land Rover Range Rover Sport, Rover |
| GPLA-14C204-PAA | 10SW003590 | Jaguar X761 |
| GPLA-14C204-PAB | 10SW000181 | Land Rover Range Rover, Land Rover Discovery, Land Rover Range Rover Sport |
| GPLA-14C204-PAB | 10SW003590 | Jaguar F-Pace, Jaguar Range Rover, Jaguar F-PACE (X761) |
| GPLA-14C204-PAB | 10SW010845 | Land Rover Range Rover, Land Rover F-Pace, Land Rover F-Type |