Original file

Volkswagen Passat Bosch MED9.1.x 0261S02168 / 1037393771

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Volkswagen Passat, hardware number 0261S02168 and software number 1037393771, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat3.2 petrol 250PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0261S02168
Software number
1037393771
Bosch part / software
0261S02631
Vehicle maker's hardware number
03H906032C
Software / calibration
03H997033K

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine3.2 petrol 250PS
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02168
Software number1037393771
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key0603addbcb9d8e1b
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02631 / 1037393771Offset in the file: 0x1CEF2F / 0x1CEF3A
Vehicle maker's hardware number03H906032COffset in the file: 0x1D795C
Software / calibration03H997033K · version 2368Offset in the file: 0x1CEF08
Engine descriptionP3.2 FSI-EU4Offset in the file: 0x1CEF15
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D9133_N43K7P0/D9133_N43K7P0/091107/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02168 and software number 1037393771. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S021451037374394Audi A4 2.0 TFSI, Audi A4 2006 Turbo Benzin, Audi A4
0261S021451037377617Audi A4 2.0 TFSI, Audi A4 2007 Turbodiesel 147.1KWKW, Audi A4
0261S021651037387528Audi RS4, Audi RS4 Avant
0261S021681037393756Volkswagen Passat
0261S021731037386852Audi A6
0261S021981037389009Audi A8
0261S021991037386829Audi A6
0261S022021037381166Audi Q7 4.2 FSI, Audi Q7 V8 4.2FSI

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page