Original file

Audi Q7 Bosch MED9.1.x 0261S02202 / 1037382103

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi Q7, hardware number 0261S02202 and software number 1037382103, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q74.2 petrol 350PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0261S02202
Software number
1037382103
Vehicle maker's hardware number
4L0907560A
Software / calibration
4L0910560B

Technical data

Vehicle
BrandAudi
Car modelQ7
Engine4.2 petrol 350PS
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02202
Software number1037382103
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyb685bf4121b13324
Identification read from the file
ECU nameMED9.1.1
Read typeFull read (boot area included)
Bosch part / software0261S02202 / 1037382103Offset in the file: 0x1D2AA5 / 0x1D2AB0
Vehicle maker's hardware number4L0907560AOffset in the file: 0x1DC60B
Software / calibration4L0910560B · version 0060Offset in the file: 0x1D2A7E
Engine description4.2l V8/4V FSIOffset in the file: 0x1D2A8B
Bosch project identifier (EPK)57/1/MED91/5/8442.01//D91154_44D500/D91154_44D500/110406/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02202 and software number 1037382103. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S021731037386852Audi A6
0261S021981037389009Audi A8
0261S021991037386829Audi A6
0261S022021037381166Audi Q7 4.2 FSI, Audi Q7 V8 4.2FSI
0261S022051037387530Audi A4 4.2 FSI
0261S022051037387536Audi RS4, Audi RS4 RS4 4.2 V8
0261S022061037387947Audi RS4 RS4 4.2 V8
0261S022061037394888Audi RS4

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page