Original file

Audi Q7 Bosch MED9.1.x 0261S02436 / 1037384968

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi Q7, hardware number 0261S02436 and software number 1037384968, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q73.6 petrol 280PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02436
Software number
1037384968
Vehicle maker's hardware number
03H906032G
Software / calibration
03H906032BF

Technical data

Vehicle
BrandAudi
Car modelQ7
Engine3.6 petrol 280PS
Power280PS / 205.9kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02436
Software number1037384968
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key423fc82467600268
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02436 / 1037384968Offset in the file: 0x1CF104 / 0x1CF10F
Vehicle maker's hardware number03H906032GOffset in the file: 0x1D80FC
Software / calibration03H906032BF · version 0818Offset in the file: 0x1CF0DD
Engine descriptionQ7 3.6-FSI-EU4Offset in the file: 0x1CF0EA
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D9139_N44F1I0/D9139_N44F1I0/051006/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02436 and software number 1037384968. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S023621037386605Audi A4
0261S023671037381921Audi S6 V10, Audi S6 V10 2005 Benzin
0261S023681037386651Audi TT, Audi TT2, Audi TT 8J
0261S023711037396722Audi RS6
0261S024371037389471Audi Q7
0261S024421037501227Audi S3
0261S024541037394342Volkswagen Passat
0261S024581037386835Audi A4, Audi A4 2007 Turbo Benzin

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page