Original file

Volkswagen Passat Bosch MED9.1.x 0261S02454 / 1037394342

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Volkswagen Passat, hardware number 0261S02454 and software number 1037394342, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat3.6 petrol 265PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02454
Software number
1037394342
Vehicle maker's hardware number
03H906032AB
Software / calibration
03H906032AN

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine3.6 petrol 265PS
Power265.0PS / 194.9kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02454
Software number1037394342
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Passat B6 3.6 FSI
File key36a1f7ceed42e798
Identification read from the file
ECU nameMED9.1.3
Read typeFull read (boot area included)
Bosch part / software0261S02454 / 1037394342Offset in the file: 0x1CEDE1 / 0x1CEDEC
Vehicle maker's hardware number03H906032ABOffset in the file: 0x1D80C6
Software / calibration03H906032AN · version 2151Offset in the file: 0x1CEDBA
Engine descriptionR3.6-FSI-EU2Offset in the file: 0x1CEDC7
Bosch project identifier (EPK)58/1/MED91/3/6W6432.D//D913E_N45C8P0/D913E_N45C8P0/041207/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02454 and software number 1037394342. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S023711037396722Audi RS6
0261S024361037384968Audi Q7
0261S024371037389471Audi Q7
0261S024421037501227Audi S3
0261S024581037386835Audi A4, Audi A4 2007 Turbo Benzin
0261S024581037389075Audi A4, Audi B7 A4 2.0T
0261S024641037386894Audi A4
0261S024661037394380Audi A6, Audi A6 2.0 TFSI, Audi A6 2.0 16v TFSI Multitronic - 170hp

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page