Original file

Audi Q7 Bosch MED9.1.x 0261S02493 / 1037510529

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi Q7, hardware number 0261S02493 and software number 1037510529, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q74.2 petrol 350PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S02493
Software number
1037510529
Bosch part / software
0261S02203
Vehicle maker's hardware number
4L0907560A
Software / calibration
4L0910560D

Technical data

Vehicle
BrandAudi
Car modelQ7
Engine4.2 petrol 350PS
Power350.0PS / 257.4kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02493
Software number1037510529
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb34d5d25b8f84f21
Identification read from the file
ECU nameMED9.1.1
Read typeFull read (boot area included)
Bosch part / software0261S02203 / 1037510529Offset in the file: 0x1D2E91 / 0x1D2E9C
Vehicle maker's hardware number4L0907560AOffset in the file: 0x1DCE97
Software / calibration4L0910560D · version 0060Offset in the file: 0x1D2E6A
Engine description4.2L V8/4VOffset in the file: 0x1D2E77
Bosch project identifier (EPK)53/1/MED91/5/8442.01//D91154_45E3/D91154_45E3/270410/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02493 and software number 1037510529. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S024791037391088Volkswagen Eos, Volkswagen Golf, Volkswagen A3 2.0 TFSI
0261S024841037397674Audi S6
0261S024861037396632Audi A8
0261S024901037390780Audi Q7
0261S024981037398708Audi A6
0261S025091037391084Volkswagen Golf, Volkswagen Golf 5 GTI 2.0 TFSI, Volkswagen Golf 5 GTI 147.1KWKW
0261S025101037389073Volkswagen Passat
0261S025111037389061Volkswagen Eos 2.0 TFSI, Volkswagen Eos, Volkswagen Golf

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page