Original file

Audi RS6 Bosch MED9.1.x 0261S02572 / 1037398568

An original (stock) flash read of the Bosch MED9.1.x control unit, fitted in Audi RS6, hardware number 0261S02572 and software number 1037398568, 2,544.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi RS65.0 petrol 580PS
Control unit
Bosch MED9.1.x
Read type
Full read (boot area included)
File
2,544.00 KB · Flash
Hardware number
0261S02572
Software number
1037398568
Vehicle maker's hardware number
4F1907552A
Software / calibration
4F1910552E

Technical data

Vehicle
BrandAudi
Car modelRS6
Engine5.0 petrol 580PS
Power580.0PS / 426.6kW
Control unit
Control unitBosch MED9.1.x
ECU makerBosch
Hardware number0261S02572
Software number1037398568
File
File typeOriginal flash read
File size2,544.00 KB (2,605,056 bytes)
File keyca0ad63e2ab927e6
Identification read from the file
ECU nameMED9.1
Read typeFull read (boot area included)
Bosch part / software0261S02572 / 1037398568Offset in the file: 0x1D55BA / 0x1D55C5
Vehicle maker's hardware number4F1907552AOffset in the file: 0x1DFF2F
Software / calibration4F1910552E · version 0040Offset in the file: 0x1D5593
Engine description5.0L V10/4V TFSIOffset in the file: 0x1D55A0
Bosch project identifier (EPK)68/1/MED91/5/10450.01//55BC6A2JG_48C1_073/55BC6A2JG_48C1_073/210708/Offset in the file: 0x1C21F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED9.1.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S02572 and software number 1037398568. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED9.1.x

HardwareSoftwareVehicles
0261S025571037389096Audi RS4
0261S025571037391607Audi RS4
0261S025581037386457Audi A6 2.0 TFSI
0261S025581037396795Audi A6, Audi A6 2.0 TFSI, Audi Leon
0261S025741037398562Audi RS6
0261S025771037395162Audi TT
0261S025781037393911Audi S8, Audi S8 5.2 V10 Quattro, Audi S6 5.2 FSI V10
0261S025831037397287Audi TT S

Bosch MED9.1.x original files

The Bosch MED9.1.x unit page