Original file

Ford Focus T 20V 2012 Bosch MED17.0 0261S09180 / 1037525731

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford Focus T 20V 2012, hardware number 0261S09180 and software number 1037525731, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus T 20V 20122.5 · 250.0PS / 183.9kW
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0261S09180
Software number
1037525731
Vehicle maker's hardware number
CM5A-12A650-AME
Software / calibration
BB5A-12B684-AC

Technical data

Vehicle
BrandFord
Car modelFocus T 20V 2012
Engine2.5
FuelPetrol
Power250.0PS / 183.9kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware number0261S09180
Software number1037525731
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFord Focus 2.5 20V 2012
File key403da8f727ce3e62
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037525731Offset in the file: 0x00401A
Vehicle maker's hardware numberCM5A-12A650-AMEOffset in the file: 0x00FC30
Software / calibrationBB5A-12B684-ACOffset in the file: 0x00FC00
Engine descriptionCM5A-14C204-AMJOffset in the file: 0x1FFF4B
Internal build stringMED170_PBL_67_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)44/1/MED17/22/MEDECM//D170_303_F4AJ4/Dst00//Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S09180 and software number 1037525731. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
00152587891037518907Volvo V40
0261S066111037510451Volvo S60 / V60
0261S075231037518907Volvo V60
0261S079431037522181Ford S Max 2.0SCTI 2012
0261S091801037530066Ford Focus T 20V 2012
02815148351037510451Volvo V60
0762939453Ford Focus
313315401037510451Volvo S60

Bosch MED17.0 original files

The Bosch MED17.0 unit page