Original file

Land Rover Range Rover Evoque Bosch MED17.0 BJ32-14C204-MBU / 1037547043

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Land Rover Range Rover Evoque, hardware number BJ32-14C204-MBU and software number 1037547043, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 petrol 241PS
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
BJ32-14C204-MBU
Software number
1037547043
Vehicle maker's hardware number
BJ32-12A650-MBU

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0 petrol 241PS
Power241.0PS / 177.3kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBJ32-14C204-MBU
Software number1037547043
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key79f4fe0ca66ea4be
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software1037547043Offset in the file: 0x04001A
Vehicle maker's hardware numberBJ32-12A650-MBUOffset in the file: 0x06199A
Software / calibrationBJ32-14C204-MBUOffset in the file: 0x061976
Bosch project identifier (EPK)54/1/MED17/2/I420GMO//D170_200_111_0870/270213/150737/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BJ32-14C204-MBU and software number 1037547043. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BJ32-14C204-MBR1037517034Land Rover Range Rover Evoque
BJ32-14C204-MBR1037529130Land Rover Range Rover Evoque
BJ32-14C204-MBT1037517034Land Rover Evoque
BJ32-14C204-MBT1037539575Land Rover Range Rover Evoque, Land Rover 2.0L MED 17.0
BJ32-14C204-MBV1037549025Land Rover Range Rover Evoque
BJ32-14C204-MBX1037517034Land Rover Range Rover Evoque
BJ32-14C204-MBX10SW000106Land Rover Range Rover Evoque
BJ32-14C204-MBXBJ32-14C204-MBXLand Rover Range Rover Evoque

Bosch MED17.0 original files

The Bosch MED17.0 unit page