Original file

Mercedes-Benz S Bosch MG1CP002 10SW034871

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz S, software number 10SW034871, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz S3.0 · 196.2PS / 144.3kW
Control unit
Bosch MG1CP002
File size
2,048.00 KB
Contents
Flash
Software number
10SW034871
Software / calibration
MRG1x_17B_FRG_046_00_Star23_xx_M256xx

Technical data

Vehicle
BrandMercedes-Benz
Car modelS
Engine3.0
FuelPetrol
Power196.2PS / 144.3kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Software number10SW034871
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file namePC
File key9deb767b7fe4e85b
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW034871Offset in the file: 0x000144
Software / calibrationMRG1x_17B_FRG_046_00_Star23_xx_M256xxOffset in the file: 0x17FA7C
Bosch project identifier (EPK)66/1/MG1CP002/1/DA_MDG1G//MRG1x_17B_FRG_046_00_Star23_xx_M256xx///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW034871. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz SFlash2,048.00 KB€20Add to cart

All reads of 10SW034871

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
060743Mercedes-Benz AMG GT
061205Mercedes-Benz GLE 53AMG
065786Mercedes-Benz E
10SW034465Mercedes-Benz CLS450 AMG
10SW037594Mercedes-Benz GLE
10SW044285Mercedes-Benz AMG__GT
10SW044805Mercedes-Benz CLS AMG
10SW047715Mercedes-Benz E

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page