Original file

Ford S-Max Bosch MED17.0 AG91-14C204-ND / 1037512112

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford S-Max, hardware number AG91-14C204-ND and software number 1037512112, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford S-Max2.0 203PS
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
AG91-14C204-ND
Software number
1037512112
Vehicle maker's hardware number
AG91-12A650-KF

Technical data

Vehicle
BrandFord
Car modelS-Max
Engine2.0 203PS
Power203.0PS / 149.3kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberAG91-14C204-ND
Software number1037512112
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameFord Max 2.0 Ecoboost 2011
File key94673df648e9b4a0
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software1037512112Offset in the file: 0x04001A
Vehicle maker's hardware numberAG91-12A650-KFOffset in the file: 0x060C48
Software / calibrationAG91-14C204-NDOffset in the file: 0x060C35
Bosch project identifier (EPK)53/1/MED17/2/I420GMO//D170_019_97_0931/210410/183031/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number AG91-14C204-ND and software number 1037512112. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
31361240 AA1037518907Volvo V40 1.6 T3, Volvo V40 1.6 Turbo
4H0906014Audi RS6 KW
7099271681278402588Ford Focus 2.0ST 2012 184KWKW, Ford Focus ST, Ford Focus
AG91-14C204-NC1037507888Ford Mondeo, Ford S-Max, Ford Galaxy
AG9N-14C204-AAH1037506930Volvo V60, Volvo V70
AG9N-14C204-BAG1037506930Volvo XC60
BB5A-12B684-ACFord Focus, Ford Focus ST
BB5A-12B684-AC1037525361Ford Focus ST

Bosch MED17.0 original files

The Bosch MED17.0 unit page