Original file

Land Rover Evoque Bosch MED17.0 BJ32-14C204-MBT / 1037517034

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Land Rover Evoque, hardware number BJ32-14C204-MBT and software number 1037517034, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Evoque2.0 200PS
Control unit
Bosch MED17.0
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
BJ32-14C204-MBT
Software number
1037517034
Bosch part / software
1037539575
Vehicle maker's hardware number
BJ32-12A650-MBT
Software / calibration
BJ32-12B684-MA

Technical data

Vehicle
BrandLand Rover
Car modelEvoque
Engine2.0 200PS
Power200.0PS / 147.1kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBJ32-14C204-MBT
Software number1037517034
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameRange Rover Evoque 2.0 Turbo
File key359d928cdf9481fd
Identification read from the file
ECU nameMED17.0
Read typeFull read (boot area included)
ProcessorTC1767
Bosch part / software1037539575Offset in the file: 0x08001A
Vehicle maker's hardware numberBJ32-12A650-MBTOffset in the file: 0x06199A
Software / calibrationBJ32-12B684-MAOffset in the file: 0x00FC00
Engine descriptionBJ32-14C204-MBTOffset in the file: 0x061976
Internal build stringMED170_PBL_67_200_0700Offset in the file: 0x00FA58
Bosch project identifier (EPK)54/1/MED17/2/I420GMO//D170_200_111_0870/270213/150737/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BJ32-14C204-MBT and software number 1037517034. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BJ32-14C204-MBN1037517034Land Rover Range Rover Evoque
BJ32-14C204-MBN1037521249Land Rover Evoque
BJ32-14C204-MBR1037517034Land Rover Range Rover Evoque
BJ32-14C204-MBR1037529130Land Rover Range Rover Evoque
BJ32-14C204-MBT1037539575Land Rover Range Rover Evoque, Land Rover 2.0L MED 17.0
BJ32-14C204-MBU1037547043Land Rover Range Rover Evoque
BJ32-14C204-MBV1037549025Land Rover Range Rover Evoque
BJ32-14C204-MBX1037517034Land Rover Range Rover Evoque

Bosch MED17.0 original files

The Bosch MED17.0 unit page