Original file

Land Rover Evoque Bosch MED17.0 BJ32-14C204-MCM / 1037522258

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Land Rover Evoque, hardware number BJ32-14C204-MCM and software number 1037522258, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Evoque2.0 240PS
Control unit
Bosch MED17.0
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
BJ32-14C204-MCM
Software number
1037522258
Vehicle maker's hardware number
BJ32-12A650-MCM

Technical data

Vehicle
BrandLand Rover
Car modelEvoque
Engine2.0 240PS
Power240.0PS / 176.5kW
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBJ32-14C204-MCM
Software number1037522258
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameLand Rover Evoque 2.0 Turbo
File key3b8d8943bfcc591d
Identification read from the file
ECU nameMED17.0
Read typeCalibration only (data set)
Bosch part / software1037522258Offset in the file: 0x04001A
Vehicle maker's hardware numberBJ32-12A650-MCMOffset in the file: 0x061782
Software / calibrationBJ32-14C204-MCMOffset in the file: 0x06175E
Bosch project identifier (EPK)54/1/MED17/2/I420GMO//D170_200_111_0862/180511/193050/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BJ32-14C204-MCM and software number 1037522258. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
BJ32-14C204-MBXBJ32-14C204-MBXLand Rover Range Rover Evoque
BJ32-14C204-MBY1037517034Land Rover Range Rover Evoque
BJ32-14C204-MBY10SW011952Land Rover Evoque, Land Rover Range Rover Evoque
BJ32-14C204-MBYBJ32-14C204-MBYLand Rover Range Rover Evoque
BJ32-14C204-MCT1037517034Land Rover Range Rover Evoque
BJ32-14C204-MCU1037517034Land Rover Range Rover Evoque
BJ32-14C204-MCU10SW000105Land Rover Range Rover Evoque
BJ32-14C204-MES1037517034Land Rover Range Rover Evoque

Bosch MED17.0 original files

The Bosch MED17.0 unit page