Original file

Ford Focus 3 RS 2016y Bosch MED17.0 DL3A-14C558-AA / 1037550873

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford Focus 3 RS 2016y, hardware number DL3A-14C558-AA and software number 1037550873, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus 3 RS 2016y2.3
Control unit
Bosch MED17.0
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
DL3A-14C558-AA
Software number
1037550873
Software / calibration
DS7A-12B684-DA

Technical data

Vehicle
BrandFord
Car modelFocus 3 RS 2016y
Engine2.3
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberDL3A-14C558-AA
Software number1037550873
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameFord Focus RS 2016y 2.3
File key6e608373b7ff5c6c
Identification read from the file
ECU nameMED17.2.2
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037550873Offset in the file: 0x00401A
Software / calibrationDS7A-12B684-DAOffset in the file: 0x00FC00
Engine descriptionES7A-14C204-AMOffset in the file: 0x3FFC4F
Internal build stringMED170_PBL_97_T3_DG506_1Offset in the file: 0x00FA58
Bosch project identifier (EPK)53/1/MED17/22/CYCLONE_MEDG170//DG170_006_0812/Dst00//Offset in the file: 0x13FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DL3A-14C558-AA and software number 1037550873. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

HardwareSoftwareVehicles
DG9N-14C204-AAC1037518907Volvo S60 / V60, Volvo S60
DG9N-14C204-BAC1037506930Volvo XC 60, Volvo XC60
DH52-14C204-MBJLand Rover Freelander
DH52-14C204-MBK1037517034Land Rover Range Rover Evoque 2.0 Si4
EG9N-14C204-IAB1037518907Volvo V70
EG9N-14C204-IAB1037544388Volvo V40
EG9N-14C204-IAD1037518907Volvo V40, Volvo S40 / V40
EG9N-14C204-IAD1037555247Volvo V40

Bosch MED17.0 original files

The Bosch MED17.0 unit page