Original file

Alpina E90 Continental MSD81 CA4CCIF64CCIF6000044CC0IF60SSFDE50044CC0IF60SSFDE5 / 0044CC0IF60SSFDE5

An original (stock) flash read of the Continental MSD81 control unit, fitted in Alpina E90, hardware number CA4CCIF64CCIF6000044CC0IF60SSFDE50044CC0IF60SSFDE5 and software number 0044CC0IF60SSFDE5, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Alpina E903.0 · 350.0PS / 257.4kW
Control unit
Continental MSD81
File size
2,048.00 KB
Contents
Flash
Hardware number
CA4CCIF64CCIF6000044CC0IF60SSFDE50044CC0IF60SSFDE5
Software number
0044CC0IF60SSFDE5
Vehicle maker's hardware number
7583324
Software / calibration
0044CC0IF60S

Technical data

Vehicle
BrandAlpina
Car modelE90
Engine3.0
FuelPetrol
Power350.0PS / 257.4kW
Control unit
Control unitContinental MSD81
ECU makerContinental
Hardware numberCA4CCIF64CCIF6000044CC0IF60SSFDE50044CC0IF60SSFDE5
Software number0044CC0IF60SSFDE5
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye44bded9f6b65199
Identification read from the file
Vehicle maker's hardware number7583324Offset in the file: 0x01FC26
Software / calibration0044CC0IF60SOffset in the file: 0x01FC00
Data set descriptionCA4CCIF6

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Continental MSD81 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CA4CCIF64CCIF6000044CC0IF60SSFDE50044CC0IF60SSFDE5 and software number 0044CC0IF60SSFDE5. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Continental MSD81

Continental MSD81 original files

The Continental MSD81 unit page