Original file

Mercedes-Benz Sprinter Delphi CRD2 015408251A / 6519039014

An original (stock) flash read of the Delphi CRD2 control unit, fitted in Mercedes-Benz Sprinter, hardware number 015408251A and software number 6519039014, 3,072.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter2.2 diesel · 136.0PS / 100.0kW
Control unit
Delphi CRD2
File size
3,072.00 KB
Contents
Flash
Hardware number
015408251A
Software number
6519039014
Vehicle maker's hardware number
6519000601
Software / calibration
6519020100

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine2.2 diesel
Power136.0PS / 100.0kW
Control unit
Control unitDelphi CRD2
ECU makerDelphi
Hardware number015408251A
Software number6519039014
File
File typeOriginal flash read
File size3,072.00 KB (3,145,728 bytes)
File key54dd49c0598de555
Identification read from the file
ECU nameCRD2
Vehicle maker's hardware number6519000601Offset in the file: 0x003C0F
Software / calibration6519020100Offset in the file: 0x004054
Engine codeOM651Offset in the file: 0x004091
Data set number6519039014Offset in the file: 0x260030
Internal build stringSM05B006_DELIV_1 Apr 11 10:42:37 2008Offset in the file: 0x004020

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 015408251A and software number 6519039014. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD2

HardwareSoftwareVehicles
014910401A6519036725Mercedes-Benz GLK220
014990321A6519032726Mercedes-Benz Sprinter
015096211A6519038674Mercedes-Benz Viano
015098231A6519033026Mercedes-Benz Sprinter
015491301A6519032417Mercedes-Benz Sprinter
015874311A6519031620Mercedes-Benz Sprinter213/313
015927681A6519031520Mercedes-Benz Sprinter
016645831A6519035920Mercedes-Benz Vito

Delphi CRD2 original files

The Delphi CRD2 unit page