Original file

Mercedes-Benz Sprinter SIMON ! Delphi CRD2 A6519019400 / 6519035238

An original (stock) flash read of the Delphi CRD2 control unit, fitted in Mercedes-Benz Sprinter SIMON !, hardware number A6519019400 and software number 6519035238, 3,072.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter SIMON !diesel 120KW
Control unit
Delphi CRD2
File size
3,072.00 KB
Contents
Flash
Hardware number
A6519019400
Software number
6519035238
Vehicle maker's hardware number
6519000601
Software / calibration
6519020100

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter SIMON !
Enginediesel 120KW
Control unit
Control unitDelphi CRD2
ECU makerDelphi
Hardware numberA6519019400
Software number6519035238
File
File typeOriginal flash read
File size3,072.00 KB (3,145,728 bytes)
File key35be80428df20ac5
Identification read from the file
ECU nameCRD2
Vehicle maker's hardware number6519000601Offset in the file: 0x003C0F
Software / calibration6519020100Offset in the file: 0x004054
Engine codeOM651Offset in the file: 0x004091
Data set number6519035238Offset in the file: 0x260030
Internal build stringSM05B006_DELIV_1 Apr 11 10:42:37 2008Offset in the file: 0x004020

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD2 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number A6519019400 and software number 6519035238. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD2

HardwareSoftwareVehicles
A65190194006519032726Mercedes-Benz Sprinter, Mercedes-Benz Sprinter208/308/408
A65190194006519033026Mercedes-Benz Sprinter, Mercedes-Benz Sprinter213/313, Mercedes-Benz VITO113
A65190194006519033126Mercedes-Benz Sprinter213/313
A65190194006519033326Mercedes-Benz Sprinter
A65190194006519037715Mercedes-Benz Sprinter211/311/411
A65190194006519038814Mercedes-Benz Sprinter216/316/416/516, Mercedes-Benz Sprinter216/316, Mercedes-Benz Sprinter
A65190194006519038914Mercedes-Benz Sprinter216/316/416/516
A65190194006519039014Mercedes-Benz Sprinter, Mercedes-Benz Sprinter213/313

Delphi CRD2 original files

The Delphi CRD2 unit page