Original file

Mercedes-Benz Sprinter Delphi CRD3 0128537659 / 6519033850

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz Sprinter, hardware number 0128537659 and software number 6519033850, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter2.1 diesel 105KW
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
0128537659
Software number
6519033850
Vehicle maker's hardware number
6519003403
Software / calibration
6519026501

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine2.1 diesel 105KW
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware number0128537659
Software number6519033850
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1a28703c3e7aa657
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519003403Offset in the file: 0x003B0F
Software / calibration6519026501Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x01C005
Data set number6519033850Offset in the file: 0x01C030
Boot software6519042500Offset in the file: 0x004154

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0128537659 and software number 6519033850. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
0128519253Mercedes-Benz
01285192531765190145Mercedes-Benz
01285192536519023703Mercedes-Benz C220
0128537659Mercedes-Benz Sprinter
0128553006Mercedes-Benz
01285530066519032063Mercedes-Benz A200
0228553006Mercedes-Benz
0228587415Mercedes-Benz

Delphi CRD3 original files

The Delphi CRD3 unit page