Original file

Mercedes-Benz GLA 200CDI 220CDI Delphi CRD3 6519011701 / 6519030928

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz GLA 200CDI 220CDI, hardware number 6519011701 and software number 6519030928, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLA 200CDI 220CDIdiesel 136.0PS / 100.0kW
Control unit
Delphi CRD3
File size
8,192.00 KB
Contents
Flash
Hardware number
6519011701
Software number
6519030928
Vehicle maker's hardware number
6519003001
Software / calibration
6519027201

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLA 200CDI 220CDI
Enginediesel 136.0PS / 100.0kW
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware number6519011701
Software number6519030928
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key3e415a8526bfb1ef
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519003001Offset in the file: 0x003A4D
Software / calibration6519027201Offset in the file: 0x3FFF34
Engine codeOM651Offset in the file: 0x0073BD
Data set number6519030928Offset in the file: 0x01C030
Boot software6519040301Offset in the file: 0x004154
Internal build stringVM01B031_DELIV_1 Aug 18 11:47:12 2010Offset in the file: 0x404120

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 6519011701 and software number 6519030928. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
65190111026519034636Mercedes-Benz CLA220 2.1 CDI
65190111026519036234Mercedes-Benz GLA 220CDI
65190111026519036534Mercedes-Benz CLA200 2.2d
65190111026519037234Mercedes-Benz CLA200
65190119026519034545Mercedes-Benz SLC 250CDI
65190119026519036545Mercedes-Benz E220 2.1 CDI R4 Blue Efficiency
65190119026519037237Mercedes-Benz E200 2.1 CDI R4
65190119026519037937Mercedes-Benz E220 2.1 CDI R4

Delphi CRD3 original files

The Delphi CRD3 unit page