Original file

Mercedes-Benz Sprinter Delphi CRD3 CRD3-17B-0WDAGAPP_D671D11 / 6519036261

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz Sprinter, hardware number CRD3-17B-0WDAGAPP_D671D11 and software number 6519036261, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Sprinter2.1 diesel 114PS
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
CRD3-17B-0WDAGAPP_D671D11
Software number
6519036261
Vehicle maker's hardware number
6519007103
Software / calibration
6519025903

Technical data

Vehicle
BrandMercedes-Benz
Car modelSprinter
Engine2.1 diesel 114PS
Power114.2PS / 84.0kW
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware numberCRD3-17B-0WDAGAPP_D671D11
Software number6519036261
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9712f7ec7d245e98
Identification read from the file
Vehicle maker's hardware number6519007103Offset in the file: 0x003B0F
Software / calibration6519025903Offset in the file: 0x3FFF34
Data set number6519036261Offset in the file: 0x01C030
Boot software6519042800Offset in the file: 0x004154

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRD3-17B-0WDAGAPP_D671D11 and software number 6519036261. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
CRD3-17B-0WDAGAPP_D662D316519036061Mercedes-Benz Sprinter, Mercedes-Benz Sprinter216/316/416
CRD3-17B-0WDAGAPP_D662D316519036161Mercedes-Benz Sprinter, Mercedes-Benz Sprinter216/316, Mercedes-Benz Sprinter214/314/414
CRD3-17B-0WDAGAPP_D662D316519036861Mercedes-Benz W907-W910, Mercedes-Benz Sprinter
CRD3-17B-0WDAGAPP_D662D316519036961Mercedes-Benz Sprinter316
CRD3-17B-0WDAGAPP_D671D116519036361Mercedes-Benz Sprinter
CRD3-17B-0WDAGAPP_D671D116519036461Mercedes-Benz Sprinter, Mercedes-Benz Sprinter214/314/414, Mercedes-Benz W907-W910
CRD3-17B-0WDAGAPP_D671D116519036561Mercedes-Benz Sprinter
CRD3-17B-0WDAGAPP_D671D116519036661Mercedes-Benz Sprinter, Mercedes-Benz Sprinter214/314/414

Delphi CRD3 original files

The Delphi CRD3 unit page