Original file

Mercedes-Benz C Delphi CRD3 CRD3-651-WMA4BD3 / 6519037720

An original (stock) flash read of the Delphi CRD3 control unit, fitted in Mercedes-Benz C, hardware number CRD3-651-WMA4BD3 and software number 6519037720, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Cdiesel · 120KW
Control unit
Delphi CRD3
File size
4,096.00 KB
Contents
Flash
Hardware number
CRD3-651-WMA4BD3
Software number
6519037720
Vehicle maker's hardware number
6519007401
Software / calibration
6519020001

Technical data

Vehicle
BrandMercedes-Benz
Car modelC
Enginediesel
Displacement2.2
Power120KW
Control unit
Control unitDelphi CRD3
ECU makerDelphi
Hardware numberCRD3-651-WMA4BD3
Software number6519037720
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key97aa0f242da93216
Identification read from the file
ECU nameCRD3
Vehicle maker's hardware number6519007401Offset in the file: 0x003A4D
Software / calibration6519020001Offset in the file: 0x100034
Engine codeOM651Offset in the file: 0x007385
Data set number6519037720Offset in the file: 0x01C030
Boot software6519040001Offset in the file: 0x004154
Internal build stringVM01B030_DELIV_2 Apr 2 15:01:55 2010Offset in the file: 0x004120

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Delphi CRD3 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRD3-651-WMA4BD3 and software number 6519037720. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Delphi CRD3

HardwareSoftwareVehicles
CRD3-651-WMA4BD26519039918Mercedes-Benz Benz C220 170 BHP
CRD3-651-WMA4BD26519040301Mercedes-Benz C 200 2011 Turbo
CRD3-651-WMA4BD2-204WA-120kW-4CSL2S-EU5OP_LH-EF-07A_ME120201Mercedes-Benz
CRD3-651-WMA4BD36519030021Mercedes-Benz CLS
CRD3-651-WMA4BD36519037820Mercedes-Benz C, Mercedes-Benz C220, Mercedes-Benz CLK320
CRD3-651-WMA4BD36519038020Mercedes-Benz C
CRD3-651-WMA4BD36519038220Mercedes-Benz C, Mercedes-Benz C250
CRD3-651-WMA4BD36519038320Mercedes-Benz E250, Mercedes-Benz C, Mercedes-Benz C220

Delphi CRD3 original files

The Delphi CRD3 unit page