Original file

Mercedes-Benz C Bosch EDC17CP45 CRD3-651-WMA4FD3 / 6519040001

An original (stock) flash read of the Bosch EDC17CP45 control unit, fitted in Mercedes-Benz C, hardware number CRD3-651-WMA4FD3 and software number 6519040001, 6,144.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz C2.2 diesel 120PS
Control unit
Bosch EDC17CP45
Read type
Full read (boot area included)
File
6,144.00 KB · Flash
Hardware number
CRD3-651-WMA4FD3
Software number
6519040001
Software / calibration
6519024801

Technical data

Vehicle
BrandMercedes-Benz
Car modelC
Engine2.2 diesel 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17CP45
ECU makerBosch
Hardware numberCRD3-651-WMA4FD3
Software number6519040001
File
File typeOriginal flash read
File size6,144.00 KB (6,291,456 bytes)
File key8103c7e57dd57010
Identification read from the file
ECU nameEDC17CP45
Read typeFull read (boot area included)
Software / calibration6519024801Offset in the file: 0x100034
Data set number6519034127Offset in the file: 0x01C030
Boot software6519040001Offset in the file: 0x004154
Bosch project identifier (EPK)33/1/EDC17_CP45/11/P_731//VBUJ///Offset in the file: 0x500B98

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP45 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CRD3-651-WMA4FD3 and software number 6519040001. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP45

HardwareSoftwareVehicles
085170151037515070BMW X5 X5-3.0D
085170161037515071BMW X6 X6-40D
1037504984 731BH6C_1037504984BMW 5er 530D
17690731BS41037517690BMW 5 Serie - Sedan 525D
EL_00000774_001_001_002FL_0000076C_001_021_018BMW X3 35D
M1234OPQR1037504984BMW 5 Serie - Sedan 530D
M1234OPQRO_7BUJ-00000A53-035BMW X3 SUV X3-35d
N47D20T1-F15N47T1_AWD_EU61037545277BMW X5 SUV 25d

Bosch EDC17CP45 original files

The Bosch EDC17CP45 unit page