Original file

Ford Galaxy Bosch MED17.0 BG91-14C204-JD / 1037513774

An original (stock) flash read of the Bosch MED17.0 control unit, fitted in Ford Galaxy, hardware number BG91-14C204-JD and software number 1037513774, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Galaxy2.0 diesel
Control unit
Bosch MED17.0
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
BG91-14C204-JD
Software number
1037513774
Vehicle maker's hardware number
BG91-12A650-JD

Technical data

Vehicle
BrandFord
Car modelGalaxy
Engine2.0 diesel
Control unit
Control unitBosch MED17.0
ECU makerBosch
Hardware numberBG91-14C204-JD
Software number1037513774
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key06f4f8f28f78a6fe
Identification read from the file
ECU nameMED17.0
Read typeOBD read (no boot area)
Bosch part / software1037513774Offset in the file: 0x08001A
Vehicle maker's hardware numberBG91-12A650-JDOffset in the file: 0x0621DC
Software / calibrationBG91-14C204-JDOffset in the file: 0x0621C9
Bosch project identifier (EPK)55/1/MED17/2/I420GMO//D170_020_9CU1_0N25/260710/185437/Offset in the file: 0x07FF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MED17.0 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number BG91-14C204-JD and software number 1037513774. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MED17.0

Bosch MED17.0 original files

The Bosch MED17.0 unit page